Project -------------------------------- Refresh Project, funded by EPSRC, Grant no. EP/K021893/1 Terms of use -------------------------------- Copyright 2019 Hannah Gough as part of PhD work undertaken under funding from EPSRC. Copyright 2019 University of Reading (Full-scale, wind-tunnel) and University of Leeds (CFD data). This dataset is licensed by the rights-holder(s) under a Creative Commons Attribution 4.0 International Licence: https://creativecommons.org/licenses/by/4.0/.] Methods and processing: ------------------------------------------------------- Full-scale: All details are given in Gough, H. L., Luo, Z., Halios, C. H., King, M.-F., Noakes, C. J., Grimmond, C. S. B., Barlow, J. F., Hoxey, R. and Quinn, A. D. (2018) Field measurement of natural ventilation rate in an idealised full-scale building located in a staggered urban array: comparison between tracer gas and pressure-based methods. Building and Environment, 137. pp. 246-256. ISSN 0360-1323 doi: https://doi.org/10.1016/j.buildenv.2018.03.055 (open access) Gough, H., Sato, T., Halios, C., Grimmond, C. S. B., Luo, Z., Barlow, J. F., Robertson, A., Hoxey, R. and Quinn, A. (2018) Effects of variability of local winds on cross ventilation for a simplified building within a full-scale asymmetric array: overview of the Silsoe field campaign. Journal of Wind Engineering and Industrial Aerodynamics, 175. pp. 408-418. ISSN 0167-6105 doi: https://doi.org/10.1016/j.jweia.2018.02.01 (open access) Gough, H. (2017) Effects of meteorological conditions on building natural ventilation in idealised urban settings. PhD thesis, University of Reading. Available: http://centaur.reading.ac.uk/71951/ Wind tunnel: Overview of all wind tunnel work carried out: Gough, H. (2017) Effects of meteorological conditions on building natural ventilation in idealised urban settings. PhD thesis, University of Reading. Available: http://centaur.reading.ac.uk/71951/ Overview of the wind tunnel work in this dataset: H. Gough, M.-F. King, P. Nathan, C.S.B. Grimmond, A. Robins, C.J. Noakes, Z. Luo, J.F. Barlow, Influence of neighbouring structures on building façade pressures: Comparison between full-scale, wind-tunnel, CFD and practitioner guidelines, Journal of Wind Engineering and Industrial Aerodynamics, Volume 189, 2019, Pages 22-33, ISSN 0167-6105, https://doi.org/10.1016/j.jweia.2019.03.011. CFD Overview of CFD data included here: Gough et al (2019, in review). Influence of neighbouring structures on building façade pressures: comparison between full-scale, wind-tunnel, CFD and practitioner guidelines. Journal of Wind Engineering and Industrial Aerodynamics. Issue and volume unknown. Other works including the models: King, M.-F., Khan, A., Delbosc, N., Gough, H. L., Halios, C., Barlow, J. F.and Noakes, C. J. (2017) Modelling urban airflow and natural ventilation using a GPU-based lattice-Boltzmann method. Building and Environment, 125. pp. 273-284. ISSN 0360-1323 doi: https://doi.org/10.1016/j.buildenv.2017.08.048 King, M.-F., Gough, H., Halios, C., Barlow, J. F., Robertson, A., Hoxey, R.and Noakes, C. J. (2017) Investigating the influence of neighbouring structures on natural ventilation potential of a full-scale cubical building using time-dependent CFD. Journal of Wind Engineering and Industrial Aerodynamics, 169. pp. 265-279. ISSN 0167-6105 doi: https://doi.org/10.1016/j.jweia.2017.07.020 Quality control ------------------------------------ Post processing of the data followed the methodology of Barlow et al. (2014) and Wood et al. (2010) (see reference list). The sonic anemometers were inter-compared before and after the experiment. As no drift and minimal differences were observed, no inter-instrument corrections are made. All thermocouples and the WXT were calibrated and corrected (on average < 0.5 °C) for instrument bias at the start and end of the experiment using an environmental chamber (Design Environmental Delta 190H) over a -20 °C to 50 °C range, accounting for hysteresis effects due to instrumental time response. CO_2 sensors were also calibrated before and after the experiment to check for drift. Wind tunnel: Calibrations in line with the ENFLO tunnels guidelines were undertaken, which included despiking of data and statistical checking. Available files: -------------------------------------------------------- Full-scale: Data is stored in the linked repositories: http://dx.doi.org/10.17864/1947.137 Wind tunnel: Wind tunnel files are self-explanatory with column names and units included. Naming convention is as follows: Run_angle ang2. Run options: Isonak- isolated cube, no shed Silsoe- Array case, no shed Angle denotes the wind angle measured. Ang2 denotes that quality control has been carried out on this set. CFD: csv files, columns are self-explanatory. For more CFD information contact m.f.king@leeds.ac.uk Useful references: -------------------------------------------------------- 2018 Gough, H. L., Luo, Z., Halios, C. H., King, M.-F., Noakes, C. J., Grimmond, C. S. B., Barlow, J. F., Hoxey, R. and Quinn, A. D. (2018) Field measurement of natural ventilation rate in an idealised full-scale building located in a staggered urban array: comparison between tracer gas and pressure-based methods. Building and Environment, 137. pp. 246-256. ISSN 0360-1323 doi: https://doi.org/10.1016/j.buildenv.2018.03.055 Gough, H., Sato, T., Halios, C., Grimmond, C. S. B., Luo, Z., Barlow, J. F., Robertson, A., Hoxey, R. and Quinn, A. (2018) Effects of variability of local winds on cross ventilation for a simplified building within a full-scale asymmetric array: overview of the Silsoe field campaign. Journal of Wind Engineering and Industrial Aerodynamics, 175. pp. 408-418. ISSN 0167-6105 doi: https://doi.org/10.1016/j.jweia.2018.02.010 2017 King, M.-F., Khan, A., Delbosc, N., Gough, H. L., Halios, C., Barlow, J. F.and Noakes, C. J. (2017) Modelling urban airflow and natural ventilation using a GPU-based lattice-Boltzmann method. Building and Environment, 125. pp. 273-284. ISSN 0360-1323 doi: https://doi.org/10.1016/j.buildenv.2017.08.048 King, M.-F., Gough, H., Halios, C., Barlow, J. F., Robertson, A., Hoxey, R.and Noakes, C. J. (2017) Investigating the influence of neighbouring structures on natural ventilation potential of a full-scale cubical building using time-dependent CFD. Journal of Wind Engineering and Industrial Aerodynamics, 169. pp. 265-279. ISSN 0167-6105 doi: https://doi.org/10.1016/j.jweia.2017.07.020 Gough, H. (2017) Effects of meteorological conditions on building natural ventilation in idealised urban settings. PhD thesis, University of Reading. Available: http://centaur.reading.ac.uk/71951/ 2014 Barlow, J.F., Halios, C.H., Lane, S.E., Wood, C.R., 2014. Observations of urban boundary layer structure during a strong urban heat island event. Environ. Fluid Mech. 15, 373–398. https://doi.org/10.1007/s10652-014-9335-6 2010 Wood, C.R., Lacser, A., Barlow, J.F., Padhra, A., Belcher, S.E., Nemitz, E., Helfter, C., Famulari, D., Grimmond, C.S.B., 2010. Turbulent flow at 190 m height above London during 2006--2008: a climatology and the applicability of similarity theory. Boundary-layer Meteorol. 137, 77–96. 1993 Kaimal, J.C., Finnigan, J.J., 1993. Atmospheric Boundary Layer Flows?: Their Structure and Measurement: Their Structure and Measurement. Oxford University Press. Turbulent flow at 190 m height above London during 2006--2008: a climatology and the applicability of similarity theory. Boundary-layer Meteorol. 137, 77–96.