All metadata for ventilation measurements undertaken during the Refresh cube campaign (RCC) at Silsoe, UK

How to cite this Dataset

Gough, Hannah, Barlow, Janet and Halios, Christos (2018): All metadata for ventilation measurements undertaken during the Refresh cube campaign (RCC) at Silsoe, UK. University of Reading. Dataset. https://doi.org/10.17864/1947.142

Description

The dataset consists of metadata for the Refresh cube campaign (RCC) undertaken at Silsoe using the 6 m^3 test structure at the site and eight other 6 m^3 straw cubes. The campaign was undertaken as part of the PhD work of Gough (2017) and forms the full-scale experiments of the REFRESH project.

The dataset is split into two sections: an isolated cube and the array case with three different opening set-ups being undertaken for both array and isolated.

The array was in place October 2014 to April 2015, and the cube was isolated from May 2015 to July 2015.

Resource Type:

Dataset

Creators:

Gough, Hannah

, Barlow, Janet and Halios, Christos

Rights-holders:

Hannah Gough, University of Reading

Data Publisher:

University of Reading

Publication Year:

2018

Data last accessed:

19 November 2024

DOI:

https://doi.org/10.17864/1947.142

Metadata Record URL:

https://researchdata.reading.ac.uk/id/eprint/142

Organisational units:

Science > School of Mathematical, Computational and Physical Sciences > Department of Meteorology

Participating Organisations:

University of Reading, University of Birmingham, University of Leeds, University of Southampton

Keywords:

cubes, ventilation, flow, urban, array, Silsoe, surface pressure, wind

Rights:

Creative Commons Attribution 4.0 International

Data Availability:

OPEN

Additional details

Project Name:

Refresh: Remodeling Building Design Sustainability from a Human Centered Approach

Funders:

Engineering and Physical Sciences Research Council (EP/K021893/1)

Resource Language:

English

Collection period:

From 3 October 2014 To 4 July 2015

Temporal coverage:

From 3 October 2014 To 4 July 2015

Geographic coverage:

Silsoe, U.K

Bounding Area:

N. Lat.	E. Long.	S. Lat.	W. Long.
53	0	52	-1

Data collection method:

More information is included within the files stored in the database. The information provided below is an overview of some of the key components.

Taken from Gough et al. (2018 accepted, in review) and Gough 2017 (reference list included in files).

Seven 3-axis Gill R3-50 sonic anemometers, measuring three-component wind velocity and direction, were deployed: two within the cube itself and five outside. The two sonic anemometers closest to the instrumented cube and two internal sonic anemometers were mounted on masts, with the centre of the sonic anemometer at 3.5 m above ground level (in line with the opening centre). The Channel mast sonic anemometer was at 2.9 m (maximum height for the equipment) and logged at 20 Hz. All others were logged simultaneously at 10 Hz to a MOXA UC 7410 Plus fan-less compact computer.

The cube surface pressure was measured using pressure taps: 7 mm holes located centrally on 0.6 m2 steel panels, which were mounted flush onto the cube cladding. Pressure signals were transmitted pneumatically, using 6 mm internal diameter plastic tubes to transducers within the cube. The individual transducers meant that the pressure tap measurements were simultaneous at 10 Hz. The pressure differential sensors for pressure taps 1-16 were Honeywell 163PC01D75 differential pressure sensors with a range of -2.5 to 2.5 inches of H2O (~-498-498 Pa). Pressure taps 17-32 were Honeywell 163PC01D76 differential pressure sensors with a range of -5 to 5 inches of H2O (~-1245- 1245 Pa). All pressure sensors had a manufacturer stated response time of 1 ms.

30 external pressure taps and 2 internal pressure taps were used. The internal pressure measurements were located under the openings. The 30 external pressure taps used were split across the four faces, four on the roof, four in a horizontal array on the centre line across the North and South faces and nine on the front and back faces, with five of those in a vertical array down the centre and four in a horizontal array at half building height.

Temperature measurements inside the cube allowed determination of thermal stratification, and along with the external temperatures, the thermally-driven ventilation component. External temperature was measured on the Channel mast using a Vaisala WXT520 weather station (manufacturerï¿½s stated error at an air temperature of 20 Â°C = Â± 0.3 Â°C), which was positioned to minimise solar gains. Internal temperatures were measured at 24 points at 10 Hz using RS components K-type 1/0.2 mm diameter thermocouples (measurement range -75 Â°C to 250 Â°C). Sampling at 10 Hz allowed for the average to be taken of a large number of samples, leading to a reasonably accurate mean half-hourly value.

Eight thermocouples were horizontally strung between the windows at a height of 3 m. The other 16 were in four vertical profiles of four thermocouples, put at varying heights and limited in height to being below 4 m due to access limitations. The size of the thermocouple errors (0.45 % Â± 2 Â°C, junction plus thermocouple) are unsuitable for measuring instantaneous fluctuations in temperature (Kaimal and Finnigan, 1993).

Tracer gas decay measurements were also undertaken as part of the experiment. Details of these are contained within the files in the database.

Data processing and preparation activities:

Post processing of the data followed the methodology of Barlow et al. (2014) and Wood et al. (2010) (see reference list).

The sonic anemometers were inter-compared before and after the experiment. As no drift and minimal differences were observed, no inter-instrument corrections are made.

All thermocouples and the WXT were calibrated and corrected (on average < 0.5 °C) for instrument bias at the start and end of the experiment using an environmental chamber (Design Environmental Delta 190H) over a -20 °C to 50 °C range, accounting for hysteresis effects due to instrumental time response. CO_2 sensors were also calibrated before and after the experiment to check for drift.

Depositing User:

Dr Hannah Gough

Date Deposited:

18 Apr 2018 12:33

Last Modified:

23 Oct 2024 04:19